Quantcast
Channel: PS3Hax Network - Playstation 3 and Playstation 4 Hacks and Mods
Viewing all 19499 articles
Browse latest View live
↧

Best way to update games?

August 12, 2016, 5:45 pm
$
0
0
Hey, I never thought to ask this but what is the best way to update games I have ripped to folder in MultiMAN? I have just been letting the games update on their own when I start them but I have been reading that there are websites where you can download updates to use as package files... I know some games require "fixes" so what should I do?

And on a side note, to save thread space, what is a good temp to keep my PS3 at? It is a new Slim 2500a model but I have been reading that custom firmware can cause overheating, do I risk a YLOD by not installing a fan control app or modifying the hull/hardware to run cooler?

Right now I am using just the fan control in Webman and have it set to keep the temp at about 65 degrees, I do plan on adding a couple of cabinet fans right behind the PS3 to pull hot air out and away from it, however. Will that be enough?

Just curious, but what does a stock un-modded PS3 run at (temperature wise)?
↧
Search

SFV PKG Link?

August 12, 2016, 6:50 pm
↧
↧

Am I running to hot on certain games?

August 12, 2016, 7:54 pm
$
0
0
I asked about this in another thread that didn't really pertain to heating issues and I was told that setting my fan (with the Webman dynamic fan control) to about 65'C should do fine as far as keeping my Slim 2500a cool enough. But curiosity got the best of me so I turned off the dynamic fan control to see what my idle and gaming temps were.

Idle my PS3 sits at 65 degrees Celsius on both CPU and RSX and after running Uncharted 3 for about 20 minutes it goes up to around 71 degrees Celsius, is that too hot? I was reading that prolonged exposure to 73'C or higher can cause YLOD issues after a while. It seems as though the fan stays on at about 30% regardless of whether I use the dynamic fan control or not so I guess there is no hard in setting it to come on at about 60 or 65'C, right? It seems to stay cool at the temp I set it at even when playing games like Uncharted 3 (right now its at 60'C on Uncharted with the fan running at 45 to 55%). Will doing so cause premature deterioration of the fan?

There is so much conflicting information out there I just want to make sure I have this right so any insight would be greatly appreciated.
↧

Big ps3 issue please help!

August 12, 2016, 9:17 pm
$
0
0
My console will not boot into recovery mode nor it will not display anything on my screen, I tried multiple times, I tryed holding the power button but nothing works, When i hold the power button it stays green for about 20 seconds and then turns off and then hold it again and turns on but does it again, I also tried taking hdd out nothing, I tried different hdmi's nothing, I tried avi nothing, I do not know what is going on, Please can anyone help me, The console was working awesomely before i accidentally dropped it side ways towards the fan part. Then it started doing this stuff. What could be the problem, I have taken it apart several times and i do no see any issues. Please someone help me. Really want my console back!!!
↧

Need Soul Calibur IV eboot

August 12, 2016, 10:38 pm
$
0
0
Can someone share Soul Calibur IV original eboot? i have search through in the internet but all i found is for SCV.
if someone can share or help that would be very appreciated.
↧
↧

PS 3 need help

August 13, 2016, 12:44 am
$
0
0
Hi guys im new here and a total noob when it comes to consoles. Last console i owned was a PS 1 back in 2000. A couple of days a go i bought a used PS 3 Fat 160 gb. 2 controlers and the rest of the cabels, but no HDMI cable. I didnt have one at home cuz my dog likes to chew stuff and u know where this is going. Anyway, i have a younger brother, and since we didnt know anything about the thing, and where excited to try it, we pluged it in with the other cable i have no idea what its called. Anyway, no picture on the screen , google told us to hold down power 5 sec to reset so we did.
First thing we saw was the red screen saying there was an error. Again folowing google, tried to rebuild the database and those other options. Thats where i gave up, but my brother continued to fiddle with it. He found an update somwhere online, i have no idea on what site he deleted his browsing history, but what he told me it was and update for 4.78, probably not an official version.
we had a spare HD lying around, so he first installed it on that hard drive, and when u would put in the hard drive that came in it, the screen was only black, so he went and instaled the same version on the hard drive that was in the PS 3 originaly, and it went back to the red warning screen.
The console was chiped prior to this, and the guy i got it from was playing it a couple hours before i got it from him. A friend of mine told me that the console cant be chipped when the software is over a certain version, and that all i could do was instal the latest official version, and play only original games, or to find some1 who can downgrade it. Any help is welcome.
↧

what type of cloth to use to remove old thermal paste?

August 13, 2016, 2:56 am
$
0
0
Hi
I just want to know what type of cloth shud be used to remove the old thermal paste ?
Can i use a tissue , toiletpaper or an old shirt dabbed with isopropyl

Any help is appreciated :)
↧

is there a tutorial and faq for dual booting OFW and CFW? (hello playerkp420.!)

August 13, 2016, 4:16 am
$
0
0
hi all :itsme:

im VERY new to both the PS3 and CFW, i got my PS3 yesterday and managed to put CFW on it but i started to regret my decision as i want to find out what its like to be able to go online with my brand new toy and play some of the games i have online (if anyone else is playing still)

i was considering trying to go back to ofw...

then i found out about dual booting and how (it seems like) its a very small risk of being banned as long as you havnt ever been online and since im too paranoid to connect my ps3 to the internet i think i should be fine

could someone help me do this? it seems like the perfect solution for me but remember im probably the noobiest noob thats ever been so im probably going to need handholding each step of the way until im confident enough to do it

thanks in advance for any help in this process
↧
Search

Cant install OFW

August 13, 2016, 9:35 am
$
0
0
Im using 4.78 Rebug D-rex and im trying to go back to 3.55 OFW but each time i try to use a downgrade pup it says only 3.65 or higher can be installed but I was able to use 3.55 pup downgrader before when I was on 4.46 Rebug D-rex. Why am I not able to switch back to OFW?im trying to downgrade so I can swap hdd without losing data but I dont see Backup utility in my system settings and I dont see Debug for HDD utility in Debug settings.
↧
↧

pls help

August 13, 2016, 10:17 am
$
0
0
I don't know much about jailbreaking my ps3 and i don't know exactly where to start. Can anybody help me jailbreak my ps3?
↧

DOWNGRADE IN EXETER, UK

August 13, 2016, 2:25 pm
$
0
0
Hi all! Looking for a quick easy downgrade of my PS3 Slim cech2004a in Exeter/Devon area. Thanks!
↧

PS3 Anti-ban eboots

August 13, 2016, 3:51 pm
$
0
0
Please move if posted in the wrong area.

Ok so today is the first time I heard about a anti-ban eboot. Is this something I would need to install for every game or is their something to install for that? Someone asked me if I had anti-ban eboots for my game so I figured I would start here since I know nothing about them.

Thanks everyone
↧

Help PSN Patch

August 13, 2016, 6:25 pm
$
0
0
I am trying to unlock ps2 classics
It tells me to activate console so I use psninja then go into PSN PAtch press X and I sign in and activate my console then I restart and go back into PSN Patch and it tells me to do it again.
↧
↧

Newbie need help with CECH-3002A

August 14, 2016, 12:56 am
$
0
0
Hi guys. I would like to help with hack my CECH-3002A. Unfortunately I found that my console is a new one and hacking should be a problem .. Could you helm me please?
Thanks a lot. Sorry for my English :)
↧

ps3 2001a fan connector broken

August 14, 2016, 6:34 am
$
0
0
is there a diagram to hard wire it to the motherboard and a link or pics would be nice thanks in advance;) I'm talking about the the connector to the motherboard that's broken
↧
Search

can someone help me how to patch IDPS using sen enabler ?

August 14, 2016, 6:34 am
$
0
0
I am on rogero 4.55 , i have idps and want to patch them using sen enabler to go online , can anyone tell me how do i do this in detail ? and also how do I use sen enabler to go online,?:s:
↧

Ps3 cechl04 not showing picture on tv

August 14, 2016, 11:54 am
$
0
0
So i have tried to transfer last of us game via filezilla and when i tried to run it it showed endless loading screen. After i gave up of the game i decided to delete it. Then when i tried to turn on ps3 he went on without prpblem but hes not showing picture on the tv. I tried deferent hdmi and few more tvs in my house and it didnt work. He didnt show me any yellow or any strange light. Its working fine i can even turn it off via menu since i know hpw it goes correctly but why the hell he doesnt show picture. Any ideas how to fix this.? I tried to reset video settins via power button but i cant reset my ps3 doesnt beep at all. Thx for help in advance

Послато са HUAWEI Y625-U21 уз помоћ Тапатока
↧
↧

ps3 2001a model downgrade error no data found

August 14, 2016, 3:20 pm
$
0
0
I done plenty of downgrades , seems like evertime I finish I have issues with installing rogero downgrade. always give error the data found tried different fat32 usb , its driving me nuts and I also when to recovery mode same bs, any other suggestion so I can finish this:dontknow:
↧

HDMI pads lifted?

August 14, 2016, 6:42 pm
$
0
0
20160814_133533.jpg

Ok if this is in the wrong section please move it. I was replacing the hdmi port on my ps4 and I finally managed to get it off using the hot air station and gently pulling it with a pair of plyers while heating the bottom side of the board. I tried the soldering iron and wick before to no avail. Well I was wondering if anyone can tell if the pads are lifted or just needs more solder on them? Is this repairable or should I solder wires to a alternate soldering point on the board?
Attached Images
↧

Naming ISO files on NTFS HDD for mmCM / webMAN

August 14, 2016, 5:42 pm
$
0
0
Hello, I'm having this weird issue with an USB formatted in NTFS, I already set the directory "PS3ISO" in the root of the USB and also the "prepntfs" for when I try to load a backup everything should work fine with mmCM and webMAN.

Well, the problem is this: I have 3 backups which are "Akiba's Trip Undead & Undressed", "Batman Arkham Asylum GOTY" and "FIFA 14".

In my first attemp, I saved the ISO files in the way PS3ISO Tools 2.2 recommend "[Game-Name] - [Game-ID]", but neither webMAN or mmCM recognized any of the backups.

So, in my second attemp, I renamed the ISO files only with the "Game-ID", like this: "BLUS31586", but again, neither webMAN or mmCM recognized any of the backups.

In my third attemp, I tried with only the "Game-Name", yet nothing.

Finally, both managers detected my backups when I renamed using the "Game-Name" but without special characters (the '&') or numbers (the '14') neither caps (the 'FIFA' word), so this is how the backups are recognized: "Akibas Trip Undead And Undressed", "Batman Arkham Asylum Game Of The Year" and "Fifa Fourteen".

My question is: Why the heck is this happening? At the beginning I thought it was a problem with non-ASCII characters, but why I can't use numbers then?

Just for the record, I'm using CFW Rebug 4.80.1 (with Cobra 7.3), mmCM 4.80.0, and the 3 backups (ISO) runs fine with both managers, the problem seems to be only at the detection.
↧
Viewing all 19499 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>