What model number is your PS3?
CECH-2001B
What firmware is your PS3 on?
4.10
Is it a hardware problem?
Is it a software problem?
If it is a software problem, have you made sure that you have downloaded the latest version of this software?
Are you running CFW?
No
Is your console bricked?
No
Have you ever downgraded your console with hardware flashers?
No, and im using progskeet
Have you tried searching the forum for someone experiencing the same problem before posting?
Yes, but the search dont like me most the time and it never finds anything.
Describe your problem:
R8 is removed
R7 is wired to switch
PinHeaders all the way around.
Everything is wired up correctly, and im pretty sure its all plugged to the progskeet right. (ive taken them on and off to recheck) The system i have is one of the rare NOR Macronix MX29GL 128ELT2I-90G chips in it. Cant find any information on it anywhere to get the specs to enter into winskeet. I know the basics about reading/writing NAND/NOR because i have JTAGGED/RGHed plenty of Xbox 360's. 360 seems to have a little more going since most of PS3 is a bunch of whiny kids with no patience and cant thank a single dev for the work they do.
Anyways i am trying to read this NOR to downgrade to 3.55 for CFW. When i plug everything up turn the PS3 on wait 15 sec put my jumper on ProgSkeet and try to read the NOR and it sits at 0x0 when i first started i had R7&R8 with the 0ohm resister still in it, removed R7 and put it on a jumper still nothing, removed R8 and still the same thing. I dont know what im doing wrong, the progskeet comes back with no shorts. If anyone can help me get this done and they have PayPal ill give you some of what im making on this for the help, i jusy want to get this done and get it returned to the customer.
CECH-2001B
What firmware is your PS3 on?
4.10
Is it a hardware problem?
Is it a software problem?
If it is a software problem, have you made sure that you have downloaded the latest version of this software?
Are you running CFW?
No
Is your console bricked?
No
Have you ever downgraded your console with hardware flashers?
No, and im using progskeet
Have you tried searching the forum for someone experiencing the same problem before posting?
Yes, but the search dont like me most the time and it never finds anything.
Describe your problem:
R8 is removed
R7 is wired to switch
PinHeaders all the way around.
Everything is wired up correctly, and im pretty sure its all plugged to the progskeet right. (ive taken them on and off to recheck) The system i have is one of the rare NOR Macronix MX29GL 128ELT2I-90G chips in it. Cant find any information on it anywhere to get the specs to enter into winskeet. I know the basics about reading/writing NAND/NOR because i have JTAGGED/RGHed plenty of Xbox 360's. 360 seems to have a little more going since most of PS3 is a bunch of whiny kids with no patience and cant thank a single dev for the work they do.
Anyways i am trying to read this NOR to downgrade to 3.55 for CFW. When i plug everything up turn the PS3 on wait 15 sec put my jumper on ProgSkeet and try to read the NOR and it sits at 0x0 when i first started i had R7&R8 with the 0ohm resister still in it, removed R7 and put it on a jumper still nothing, removed R8 and still the same thing. I dont know what im doing wrong, the progskeet comes back with no shorts. If anyone can help me get this done and they have PayPal ill give you some of what im making on this for the help, i jusy want to get this done and get it returned to the customer.