Hi Guys
let me tell you what happened yesterday with my ps3 4.30 Rogero C.F.W.
First I connected the ps3 internal HDD on my computer then, I format it with (Fat32) then, I hoke it into my ps3 and turn my counsel on, the ps3 indicated that the internal HDD is unreadable and need to be reformatted and it's required to hock up a media drive that include 4.30 firmware in order to complete the format and to install a new firmware so, I applied Rogero method for downgrade without using E3 flasher and guess what !!!!!! it really works :laugh:
here is what I did
- Downgrading back to 3.55 is always possible using the following steps :
- Download the Downgrader PUP > Downgrader PUP mirror > Downgrader PUP
Size 176MB (184,595,263 bytes) MD5: 49d80e07fc1f5ca1b0840e02e94635db
- Rename the downloaded file to PS3UPDAT.PUP and put it on your USB in: USBPS3UPDATEPS3UPDAT.PUP
- While on Rogero CFW4.30, go to System Update from XMB and install the Downgrader PUP.
- After the Downgrader PUP installs youll be on a hybrid CFW3.55 that will still shows the spoofed ver4.21 from system settings.
- In case you didnt have it Set Before, Enable QA flag by following these steps:
1- Download the Rebug QA_Toggle package from here > toggle_qa.pkg
2- Put the toggle_qa.pkg on USB and Install it on the PS3.
3- Run the Rebug Toggle QA from XMB, the screen will go Black and you will see HDD Led activity then if all went fine you will hear 2 or 3 Beeps and the PS3 will Restart back to XMB.
4- If you want to make sure QA flag was set, go to Network Settings then apply the following key combo (all at the same time):
L1 + L2 + L3 (press left stick) + R1 + R2 + dpad_down
You should see Edy Viewer, Debug Settings, and Install Package Files if done correctly.
- Now put Rogero CEX-3.55 CFW V3.7″ on your USB in: USBPS3UPDATEPS3UPDAT.PUP > Rogero CEX-3.55 CFW V3.7.PUP
- Start the PS3 and install Rogero CEX-3.55 CFW V3.7″ using the System Update from XMB.
- Once youre back on Rogero CFW3.55 v3.7 you can now install any CFW 3.55/4.21/4.30 using the System Update from XMB
( or Recovery Menu if XMB Update didnt work ).
So i think it could work with 4.30 O.F.W we need to give it a try
let me tell you what happened yesterday with my ps3 4.30 Rogero C.F.W.
First I connected the ps3 internal HDD on my computer then, I format it with (Fat32) then, I hoke it into my ps3 and turn my counsel on, the ps3 indicated that the internal HDD is unreadable and need to be reformatted and it's required to hock up a media drive that include 4.30 firmware in order to complete the format and to install a new firmware so, I applied Rogero method for downgrade without using E3 flasher and guess what !!!!!! it really works :laugh:
here is what I did
- Downgrading back to 3.55 is always possible using the following steps :
- Download the Downgrader PUP > Downgrader PUP mirror > Downgrader PUP
Size 176MB (184,595,263 bytes) MD5: 49d80e07fc1f5ca1b0840e02e94635db
- Rename the downloaded file to PS3UPDAT.PUP and put it on your USB in: USBPS3UPDATEPS3UPDAT.PUP
- While on Rogero CFW4.30, go to System Update from XMB and install the Downgrader PUP.
- After the Downgrader PUP installs youll be on a hybrid CFW3.55 that will still shows the spoofed ver4.21 from system settings.
- In case you didnt have it Set Before, Enable QA flag by following these steps:
1- Download the Rebug QA_Toggle package from here > toggle_qa.pkg
2- Put the toggle_qa.pkg on USB and Install it on the PS3.
3- Run the Rebug Toggle QA from XMB, the screen will go Black and you will see HDD Led activity then if all went fine you will hear 2 or 3 Beeps and the PS3 will Restart back to XMB.
4- If you want to make sure QA flag was set, go to Network Settings then apply the following key combo (all at the same time):
L1 + L2 + L3 (press left stick) + R1 + R2 + dpad_down
You should see Edy Viewer, Debug Settings, and Install Package Files if done correctly.
- Now put Rogero CEX-3.55 CFW V3.7″ on your USB in: USBPS3UPDATEPS3UPDAT.PUP > Rogero CEX-3.55 CFW V3.7.PUP
- Start the PS3 and install Rogero CEX-3.55 CFW V3.7″ using the System Update from XMB.
- Once youre back on Rogero CFW3.55 v3.7 you can now install any CFW 3.55/4.21/4.30 using the System Update from XMB
( or Recovery Menu if XMB Update didnt work ).
So i think it could work with 4.30 O.F.W we need to give it a try