120gb slim dyn motherboard
samsung nor chip
i succesfully downgraded ps3 just like this one a few weeks ago
but i bent the motherboard opening that ps3 and could not get it to work after i put it back together, i ended up reflowing that ps3 until i fried the gpu chip because i thought that was the problem because the ps3 would boot up and play as long as i had a stack of books on top of the gpu chip or fan, i relised it was the motherboard after i fried the gpu at 480c on my aoyue 968 the gpu actullay reached over 300c, im not upset that i fried it, it was trash to me if only way i could play it was on a box with a stack of books anyways, but i did get to learn how to downgrade it and install cfw and play back up games for a few weeks
so i got another ps3 just like it and i have sat down for many hours trying over and over to read the nor, i reseat the e3 flasher pads and cleaned them and nor chip with alcohol and q tips
but i always get the say error mesage
i have updated the e3 flasher again just to see if it would help, with the update that says its for multiple consoles in baileys guide after updating e3 flasher again i still got exact same error
i scraped away a little more plastic from the nor clip to make sure that is not the problem but its the exact same ps3 as the last ps3
i guess im gonna buy a couple more nor clips just to see if i have better luck with a new clip but i wont get them anytime soon
this is what e3 flasher log says...
start logging...backup PS3 BIOS.fail to initialize E3 Nor.
these are the error lights i get, its always, always the exact same error lights 1,5,6...
1 0 0 0 1 1 0 0 Failed to initialize PS3 BIOS Check pads / clip at PS3 board check may not be properly seated
i notice that when i push on the e3 board with all the switches that it makes some blue lights stay solid so i push on it until the solid blue lights stop, i notice this with the last ps3 but i still downgraded that ps3
samsung nor chip
i succesfully downgraded ps3 just like this one a few weeks ago
but i bent the motherboard opening that ps3 and could not get it to work after i put it back together, i ended up reflowing that ps3 until i fried the gpu chip because i thought that was the problem because the ps3 would boot up and play as long as i had a stack of books on top of the gpu chip or fan, i relised it was the motherboard after i fried the gpu at 480c on my aoyue 968 the gpu actullay reached over 300c, im not upset that i fried it, it was trash to me if only way i could play it was on a box with a stack of books anyways, but i did get to learn how to downgrade it and install cfw and play back up games for a few weeks
so i got another ps3 just like it and i have sat down for many hours trying over and over to read the nor, i reseat the e3 flasher pads and cleaned them and nor chip with alcohol and q tips
but i always get the say error mesage
i have updated the e3 flasher again just to see if it would help, with the update that says its for multiple consoles in baileys guide after updating e3 flasher again i still got exact same error
i scraped away a little more plastic from the nor clip to make sure that is not the problem but its the exact same ps3 as the last ps3
i guess im gonna buy a couple more nor clips just to see if i have better luck with a new clip but i wont get them anytime soon
this is what e3 flasher log says...
start logging...backup PS3 BIOS.fail to initialize E3 Nor.
these are the error lights i get, its always, always the exact same error lights 1,5,6...
1 0 0 0 1 1 0 0 Failed to initialize PS3 BIOS Check pads / clip at PS3 board check may not be properly seated
i notice that when i push on the e3 board with all the switches that it makes some blue lights stay solid so i push on it until the solid blue lights stop, i notice this with the last ps3 but i still downgraded that ps3