I was following this tutorial and I got to the end of it fine, but the problem now is that when im trying to install ANY FIRMWARE , it gives me an error, 3.55 ofw, 3.55 kmeaw, tryed recovery mode, tryed qa flagger, without it. Nada, so any advice would be good, i herd i need to change my target id or what not, but apprentice says it all :P
Oh and for the noobs below me who are wondering how to run eEID_RKDumper, just simply go to itskamal 3.55dex then install dev_blind.pkg and then you must go to multiman and scroll all the way left to "settings", scroll all the way down to enable "write to flash."
After that, download lv2loader.pkg from rebug, download the lv2 self file for kmeaw or anyother firmware and ftp it to the root of dev_blind which you created with the package. Go to your ps3, run lv2loader and run eEID_RKDumper, simply ftp your eid0 key from tmp folder or multiman it with a usb.
"Hi guys
we found a Simple method for return to CEX without a CEX Flash backup
we Tested 45 Console With this Method So I would say it Working 100%
Note:This tutorial will format your internal ps3 HDD
Step1: Installing DEX 3.55_MFW without OtherOS v3 Exeedy
First Download DEX 3.55_MFW without OtherOS v3 Exeedy and Install That on you PS3
Download DEX 3.55_MFW without OtherOS v3 Exeedy
Step2: Dumping your DEX Flash with Memdump
in this Step you must Install memdump on your PS3
Download memdump_0.01-FINAL
Download and Install That on your PS3
Put a USB Device in the Right USB Port
then Run memdump and Press X for dumping your Flash in USB Device.
Step3: Installing Rogero CFW v3.7
in this Step you must install Rogero CFW v3.7 on you DEX console.but How?
Follow me:
First Download Rogero CFW v3.7 and rename that to "PS3UPDAT.PUP"
Download Rogero CFW v3.7
Put PS3UPDAT.PUP in Root of your USB Device
Now Download this Special Lv2diag:
Download Special Lv2diag
too Put Lv2diag in Root of your USB Device
for going to FactoryServiceMode without Jig USB we need below App:
Download FactoryServiceMode
too Put FactoryServiceMode.pkg in Root of your USB Device
So you have three files in your USBDevice (FactoryServiceMode.pkg,Lv2diag and PS3UPDAT.PUP)
connect your USB Device in the Right USB Port Then turn on your PS3
go to Install Package and Installing FactoryServiceMode.pkg on your PS3
now run it and wait until you PS3 turn off automatic
After your PS3 turned off ,You must get out of FactoryServiceMode
for this Download Lv2diag2 in below Link:
Download Lv2diag2
Put Lv2diag in a empty USB device and connect USB Device to Right USB Port and turn on your PS3
now you are already on Rogero 3.55 (v3.7)
Step4: Dumping your eid_root_key
First Download eEID_RKDumper
Download eEID_RKDumper
install eEID_RKDumper.pkg then remove your USB then run eEID_RKDumper
open multiman go to mmOS
open folder dev_hdd0/temp then copy eid_root_key to usb (48bytes)
Step5: Convert DEX Flash To CEX Flash
First Download Special Package :
Download Special Package By Nicolas19
After Download,Extract That To Drive " C " in your PC
now install Win32OpenSSL_Light-1_0_1c.exe
during the installation,Select " /bin "
after Installing Finished,Go in Drive "C" and Rename OpenSSL-Win32 To OpenSSL
now Rename your DEX Flash(flash_store_3.500) to "flashdex" and eid_root_key to eid0 and Then copy both the file in c2d Folder
Open CMD and Type the two times " cd .."
go in c2d folder with Typing "cd c2d"
you are already in c2d Folder
Now copy the text below and Paste in CMD and Then Press "Enter":
c2d.exe eid0 flashdex.bin flashcex.bin 84
A new file will be created with the name"flashcex"
Rename flashcex to myCEX.EID0.NORBIN and Continue
Step6: write your CEX Dump on Flash
copy my.CEX.EID0.NORBIN (nor Console) to USB Device and Connect it to your PS3
open multiman > mmOS then double click 3my.CEX.EID0.NORBIN in USB Device and Choose yes>yes>yes
quit multiman but Don't turn off your PS3
Now Put Rogero CFW v3.7, Lv2diag.self in your USB Device Like Step 3 and Connect to Right USB Port
Run FactoryServiceMode app From XMB and wait until your PS3 turn off automatic
After your PS3 turned off ,You must get out of FactoryServiceMode
Put Lv2diag2(Like Step 3) in a empty USB device and connect USB Device to Right USB Port and turn on your PS3
now you are already on Rogero 3.7 and Your Console is CEX
enjoy............................
Source Console-Hax (for more use Google Translator)
__________________"[/I][/I]
Oh and for the noobs below me who are wondering how to run eEID_RKDumper, just simply go to itskamal 3.55dex then install dev_blind.pkg and then you must go to multiman and scroll all the way left to "settings", scroll all the way down to enable "write to flash."
After that, download lv2loader.pkg from rebug, download the lv2 self file for kmeaw or anyother firmware and ftp it to the root of dev_blind which you created with the package. Go to your ps3, run lv2loader and run eEID_RKDumper, simply ftp your eid0 key from tmp folder or multiman it with a usb.
"Hi guys
we found a Simple method for return to CEX without a CEX Flash backup
we Tested 45 Console With this Method So I would say it Working 100%
Note:This tutorial will format your internal ps3 HDD
Step1: Installing DEX 3.55_MFW without OtherOS v3 Exeedy
First Download DEX 3.55_MFW without OtherOS v3 Exeedy and Install That on you PS3
Download DEX 3.55_MFW without OtherOS v3 Exeedy
Step2: Dumping your DEX Flash with Memdump
in this Step you must Install memdump on your PS3
Download memdump_0.01-FINAL
Download and Install That on your PS3
Put a USB Device in the Right USB Port
then Run memdump and Press X for dumping your Flash in USB Device.
Step3: Installing Rogero CFW v3.7
in this Step you must install Rogero CFW v3.7 on you DEX console.but How?
Follow me:
First Download Rogero CFW v3.7 and rename that to "PS3UPDAT.PUP"
Download Rogero CFW v3.7
Put PS3UPDAT.PUP in Root of your USB Device
Now Download this Special Lv2diag:
Download Special Lv2diag
too Put Lv2diag in Root of your USB Device
for going to FactoryServiceMode without Jig USB we need below App:
Download FactoryServiceMode
too Put FactoryServiceMode.pkg in Root of your USB Device
So you have three files in your USBDevice (FactoryServiceMode.pkg,Lv2diag and PS3UPDAT.PUP)
connect your USB Device in the Right USB Port Then turn on your PS3
go to Install Package and Installing FactoryServiceMode.pkg on your PS3
now run it and wait until you PS3 turn off automatic
After your PS3 turned off ,You must get out of FactoryServiceMode
for this Download Lv2diag2 in below Link:
Download Lv2diag2
Put Lv2diag in a empty USB device and connect USB Device to Right USB Port and turn on your PS3
now you are already on Rogero 3.55 (v3.7)
Step4: Dumping your eid_root_key
First Download eEID_RKDumper
Download eEID_RKDumper
install eEID_RKDumper.pkg then remove your USB then run eEID_RKDumper
open multiman go to mmOS
open folder dev_hdd0/temp then copy eid_root_key to usb (48bytes)
Step5: Convert DEX Flash To CEX Flash
First Download Special Package :
Download Special Package By Nicolas19
After Download,Extract That To Drive " C " in your PC
now install Win32OpenSSL_Light-1_0_1c.exe
during the installation,Select " /bin "
after Installing Finished,Go in Drive "C" and Rename OpenSSL-Win32 To OpenSSL
now Rename your DEX Flash(flash_store_3.500) to "flashdex" and eid_root_key to eid0 and Then copy both the file in c2d Folder
Open CMD and Type the two times " cd .."
go in c2d folder with Typing "cd c2d"
you are already in c2d Folder
Now copy the text below and Paste in CMD and Then Press "Enter":
c2d.exe eid0 flashdex.bin flashcex.bin 84
A new file will be created with the name"flashcex"
Rename flashcex to myCEX.EID0.NORBIN and Continue
Step6: write your CEX Dump on Flash
copy my.CEX.EID0.NORBIN (nor Console) to USB Device and Connect it to your PS3
open multiman > mmOS then double click 3my.CEX.EID0.NORBIN in USB Device and Choose yes>yes>yes
quit multiman but Don't turn off your PS3
Now Put Rogero CFW v3.7, Lv2diag.self in your USB Device Like Step 3 and Connect to Right USB Port
Run FactoryServiceMode app From XMB and wait until your PS3 turn off automatic
After your PS3 turned off ,You must get out of FactoryServiceMode
Put Lv2diag2(Like Step 3) in a empty USB device and connect USB Device to Right USB Port and turn on your PS3
now you are already on Rogero 3.7 and Your Console is CEX
enjoy............................
Source Console-Hax (for more use Google Translator)
__________________"[/I][/I]